5.2.2. Functions and operations of the remap and pause module

The remap and pause control is the combination of four separate functions:

Pause

Defines a method of allowing the processor system to enter a low-power, wait for interrupt state, when the system does not require the processor to be active.

Identification

Provides an indication of the system configuration.

Reset memory map

Provides a method of overlaying the system base memory at reset.

Reset status

Provides an indication of the cause of the most recent reset condition. A minimum implementation is defined.

Copyright © 2001 ARM Limited. All rights reserved.ARM DDI 0226A
Non-Confidential