ARM720T™ Technical Reference Manual Using this manual

Using this manual

This document is organized into the following chapters:

Chapter 1 Introduction: Read this chapter for an introduction to the ARM720T processor.
Chapter 2 Programmer’s Model: Read this chapter for a description of the 32-bit ARM and 16-bit Thumb instruction sets.
Chapter 3 Configuration: Read this chapter for a description of the ARM1156F-S control coprocessor CP15 register configurations and programming details.
Chapter 4 Instruction and Data Cache: Read this chapter for a description of the mixed instruction and data cache.
Chapter 5 Write Buffer: Read this chapter for a description on how to enhance the system performance of the ARM720T processor by using the write buffer.
Chapter 6 The Bus Interface: Read this chapter for a description of the ARM720T processor bus interface.
Chapter 7 Memory Management Unit: Read this chapter for a description of the functions and how to use of the Memory Management Unit (MMU).
Chapter 8 Coprocessor Interface: Read this chapter for a description on how to connect coprocessors to the ARM1156F-S coprocessor interface.
Chapter 9 Debugging Your System: Read this chapter for a description of the hardware extensions and integrated on-chip debug support for the ARM720T processor.
Chapter 10 ETM Interface: Read this chapter for a description of the Embedded Trace Macrocell support for the ARM720T processor.
Chapter 11 Test Support: Read this chapter for a description of how to perform device-specific test operations.
Appendix A Signal Descriptions: Read this appendix for a list of all ARM720T processor interface signals.

Copyright © 2001, 2003, 2004 ARM Limited. All rights reserved.	ARM DDI 0229C
PDF version