| Copyright © 2002-2003, 2005 ARM Limited. All rights reserved. | ARM DDI 0230D |
| Non-Confidential | |
 PDF version | |
| Home > Programmer’s Model for Test > Test registers > Test Input 1 Register, MPMCITIP1 |
| |||
| Home > Programmer’s Model for Test > Test registers > Test Input 1 Register, MPMCITIP1 | |||
The MPMCITIP1 Register is a seven-bit register. This register must only be used in test mode.
The register can be accessed with one wait state.
Table 4.4 lists the bit assignments for the MPMCITIP1 Register.
Table 4.4. MPMCITIP1 Register bit assignments
| Bits | Name | Description |
|---|---|---|
| [31:7] | - | Reserved, read undefined, must be written as zeros |
| [6:3] | MPMCCKEINIT | Clock enable signal MPMCCKEINIT[3:0]. Read: Read the value of this field if the MPMCITCR T bit is HIGH. Read the value of the MPMCCKEINIT[3:0] input signal if the MPMCITCR T bit is LOW. Write: 0 = Clear this field if the MPMCITCR T bit is HIGH. 1 = Set this field if the MPMCITCR T bit is HIGH. |
| [2] | MPMCDQMINIT | Data mask signal MPMCDQMINIT. Read: Read the value of this field if the MPMCITCR T bit is HIGH. Read the value of the MPMCDQMINIT input signal if the MPMCITCR T bit is LOW. Write: 0 = Clear this field if the MPMCITCR T bit is HIGH 1 = Set this field if the MPMCITCR T bit is HIGH. |
| [1] | MPMCEBIBACKOFF | EBI backoff signal MPMCEBIBACKOFF. Read: Read the value of this field if the MPMCITCR T bit is HIGH. Read the value of the MPMCEBIBACKOFF input signal if the MPMCITCR T bit is LOW. Write: 0 = Clear this field if the MPMCITCR T bit is HIGH 1 = Set this field if the MPMCITCR T bit is HIGH. |
| [0] | MPMCEBIGNT | EBI grant signal MPMCEBIGNT. Read: Read the value of this field if the MPMCITCR T bit is HIGH. Read the value of the MPMCEBIGNT input signal if the MPMCITCR T bit is LOW. Write: 0 = Clear this field if the MPMCITCR T bit is HIGH 1 = Set this field if the MPMCITCR T bit is HIGH. |
| Copyright © 2002-2003, 2005 ARM Limited. All rights reserved. | ARM DDI 0230D |
| Non-Confidential | |
| PDF version | |
| Home > Programmer’s Model for Test > Test registers > Test Input 1 Register, MPMCITIP1 |