3.9.2. Signal descriptions

Table 3.9 lists non-AMBA signals used by the decoder module.

Table 3.9. Decoder module signals

Signal

Type

Direction

Description

REMAP

Reset memory map

Input

When LOW, the internal memory is not part of the system memory map, and external memory is mapped from address 0x00000000 that contains the system startup code. In normal operation, this signal is HIGH, permitting use of the internal memory.

Note

For a description of the AMBA signals used by the decoder, see AMBA signals.

Copyright © 2003, 2007 ARM Limited. All rights reserved.ARM DDI 0243C
Non-Confidential