5.3.1. Programmer’s model

Table 5.4 lists the user-defined settings for the external ROM module.

Table 5.4. User-defined settings for the external ROM module

Signal

Type

Default

setting

Description

FILENAME

Input filename

-

This signal points to the local input data file that is read in after reset.

ROMDEPTH

Memory depth

16

This signal sets the memory depth in KB. If the value is increased from the default setting, then the address input bus A must also be increased to enable all memory to be addressed.

Copyright © 2003, 2007 ARM Limited. All rights reserved.ARM DDI 0243C
Non-Confidential