B.3. Slave port 1 I/O signal timing parameters

Table B.3 shows the slave port 1 I/O signal timing parameters.

Table B.3. Slave port 1 I/O

Port nameI/O typeMaximum constraint
ARADDRS1[31:0]Input50%
ARBURSTS1[1:0]Input70%
ARCACHES1[3:0]Input50%
ARIDS1[5:0]Input50%
ARLENS1[3:0]Input70%
ARLOCKS1[1:0]Input50%
ARPROTS1[2:0]Input70%
ARREADYS1Output70%
ARSIZES1[2:0]Input70%
ARUSERS1[4:0]Input50%
ARVALIDS1Input50%
AWADDRS1[31:0]Input50%
AWBURSTS1[1:0]Input70%
AWCACHES1[3:0]Input70%
AWIDS1[5:0]Input70%
AWLENS1[3:0]Input70%
AWLOCKS1[1:0]Input50%
AWPROTS1[2:0]Input70%
AWREADYS1Output70%
AWSIZES1[2:0]Input70%
AWUSERS1[4:0]Input70%
AWUSERS1[9:8]Input70%
AWVALIDS1Input50%
BIDS1[5:0]Output70%
BREADYS1Input70%
BRESPS1[1:0]Output70%
BVALIDS1Output70%
INCLKENS1Input30%
OUTCLKENS1Output30%
RDATAS1[63:0]Output70%
RIDS1[5:0]Output70%
RLASTS1Output70%
RREADYS1Input50%
RRESPS1[1:0]Output50%
RVALIDS1Output70%
WDATAS1[63:0]Input70%
WIDS1[5:0]Input70%
WLASTS1Input50%
WREADYS1Output70%
WSTRBS1[7:0]Input50%
WVALIDS1Input50%
Copyright © 2007 ARM Limited. All rights reserved.ARM DDI 0246A
Non-Confidential