4.3.15.  CtArmdPageWalk<x>

The ARM926 data AHB interface uses the SINGLE burst format with a specific protection bits set to perform page table walks for either the instruction or data path:

These registers contain the total count of completed page table walk transactions that have occurred on the ARM-D AHB layer for the Instruction or Data path. The count is disabled by default and can be controlled through the AHBMONCtrlReg, and reset through the AHBMONRstCtrs. The counters are also controlled by the DBGACK in relation to configuration, see AHBMONCtrlReg.

Copyright © 2004, 2006 ARM Limited. All rights reserved.ARM DDI 0287B
Non-Confidential