9.3.7. ETB Control Register, CTL, 0x020

Figure 9.3 shows the ETB Control Register bit assignments.

Figure 9.3. ETB Control Register bit assignments

Table 9.11 shows the ETB Control Register bit assignments.

Table 9.11. ETB Control Register bit assignments.


ETB Trace Capture Enable.

1 = enable trace capture

0 = disable trace capture.

This is the master enable bit forcing FtStopped HIGH when TraceCaptEn is LOW. When capture is disabled, any remaining data in the ATB formatter is stored to RAM. When all data is stored the formatter outputs FtStopped. Capture is fully disabled, or complete, when FtStopped goes HIGH. See ETB Formatter and Flush Status Register, FFSR, 0x300.

Copyright © 2004-2009 ARM. All rights reserved.ARM DDI 0314H