4.4.4. CTI Application Trigger Clear Register, CTIAPPCLEAR, 0x018

The CTI Application Trigger Clear Register is write-only. A write to this register causes a channel event to be cleared, corresponding to the bit written to.

Figure 4.6 shows the bit assignments.

Figure 4.6. CTI Application Trigger Clear Register bit assignments


Table 4.5 shows the bit assignments.

Table 4.5. CTI Application Trigger Clear Register bit assignments

BitsNameDescription
[31:4]-Reserved RAZ DNM.
[3:0]APPCLEAR

Clears corresponding bits in the CTIAPPSET register.

1 = application trigger disabled in the CTIAPPSET register

0 = no effect.

There is one bit of the register for each channel.


Copyright © 2004-2009 ARM. All rights reserved.ARM DDI 0314H
Non-Confidential