10.2.2. Trace interface ports

Table 10.1 shows the trace interface ports.

Table 10.1. Trace interface ports

TRACECLKINInputDecoupled clock from ATB to enable easy ramping up of the trace port speed. This is typically from a controllable clock source on the processor, but can be driven by an external clock generator if a high speed pin is used. Data changes on the rising edge only.
TRESETnInputReset for TRACECLKIN registers.
TRACESWOOutputTrace out port over a single pin. Manchester encoded and UART formats are supported.

Copyright © 2004-2009 ARM. All rights reserved.ARM DDI 0314H