4.4.3. CTI Application Trigger Set Register, CTIAPPSET, 0x014

The CTI Application Trigger Set Register is read/write. A write to this register causes a channel event to be raised, corresponding to the bit written to.

Figure 4.5 shows the bit assignments.

Figure 4.5. CTI Application Trigger Set Register bit assignments

Table 4.4 shows the bit assignments.

Table 4.4. CTI Application Trigger Set Register bit assignments

[31:4]-Reserved RAZ DNM.

Setting a bit HIGH generates a channel event for the selected channel.


0 = application trigger inactive (reset)

1 = application trigger active.


0 = no effect

1 = generate channel event.

There is one bit of the register for each channel.


The CTIINEN registers do not affect the CTIAPPSET operation.

Copyright © 2004-2009 ARM. All rights reserved.ARM DDI 0314H