8.7.2. Omission of TRACECTL

For restricted pin devices where removal of the trace data is important, the TRACECTL can be removed. Omitting TRACECTL is only possible with the formatter enabled and continuous mode selected. See Formatter and Flush Control Register, 0x304.

There are two mechanisms that can report the omission or presence of the TRACECTL pin:

Currently, only the changing of TPCTL is supported and this must be done within the ASIC to indicate the presence, tied HIGH, or absence, tied LOW, of a TRACECTL pin.

Copyright © 2004-2009 ARM. All rights reserved.ARM DDI 0314H