11.3.6. ITATBCTR2

The ITATBCTR2 characteristics are:

Purpose

Integration test.

Usage constraints

You must set bit [0] of TPIU_ITCTRL to use this register. See Integration Mode Control, TPIU_ITCTRL.

Configurations

This register is available in all processor configurations.

Attributes

Figure 11.7 shows the ITATBCTR2 bit assignments.

Figure 11.7. ITATBCTR2 bit assignments


Table 11.7 shows the ITATBCTR2 bit assignments.

Table 11.7. ITATBCTR2 bit assignments

BitsNameFunction
[31:1]-Reserved
[0]ATREADY1, ATREADY2This bit sets the value of both the ETM and ITM ATREADY outputs, if the TPIU is in integration test mode.

Copyright © 2005-2008, 2010 ARM Limited. All rights reserved.ARM DDI 0337H
Non-Confidential