11.3.7. Integration ITM Data

The Integration ITM Data characteristics are:

Purpose

Trace data integration testing.

Usage constraints

You must set bit [1] of TPIU_ITCTRL to use this register. See Integration Mode Control, TPIU_ITCTRL.

Configurations

This register is available in all processor configurations.

Attributes

Figure 11.8 shows the Integration ITM Data bit assignments.

Figure 11.8. Integration ITM Data bit assignments

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


Table 11.8 shows the Integration ITM Data bit assignments.

Table 11.8. Integration ITM Data bit assignments

BitsNameFunction
[31:30]-Reserved
[29]ITM ATVALID inputReturns the value of the ITM ATVALID signal.
[28:27]ITM byte countNumber of bytes of ITM trace data since last read of Integration ITM Data Register.
[26]ETM ATVALID inputReturns the value of the ETM ATVALID signal.
[25:24]ETM byte countNumber of bytes of ETM trace data since last read of Integration ETM Data Register.
[23:16]ITM data 2ITM trace data. The TPIU discards this data when the register is read.
[15:8]ITM data 1
[7:0]ITM data 0

Copyright © 2005-2008, 2010 ARM Limited. All rights reserved.ARM DDI 0337I
Non-Confidential