15.7.4. ITTRIGOUTACK, 0xEF0

ITTRIGOUTACK is a read-only register. This register enables the values of signal inputs to be read when bit [0] of the Integration Mode Control Register is set to 1. Figure 15.20 shows the bit arrangement of the ITTRIGOUTACK Register.

Figure 15.20. ITTRIGOUTACK Register format


Table 15.22 shows how the bit values correspond with the ITTRIGOUTACK Register functions.

Table 15.22. ITTRIGOUTACK Register bit functions

BitsFieldFunction
[31:9] -Reserved, RAZ
[8:0]CTTRIGOUTACKReads the values of the CTTRIGOUTACK inputs

Each bit of the ITTRIGOUTACK Register corresponds to a bit on the ITTRIGOUT Register. It indicates when a trigger output has been received.

Table 15.23 shows how some of the bits of the ITTRIGOUTACK Register are connected to other integration test registers in the processor.

Table 15.23. ITTRIGOUTACK connections to other integration test registers

BitsFieldConnected to Register nameAddress bit
[8] ----
[7]DBGRESTARTEDDebugIntegration Internal Output Control Register, 0xEF4[4]
[6:1]- --
[0]DBGACKDebugIntegration Internal Output Control Register, 0xEF4[0]

Copyright © 2006-2009 ARM Limited. All rights reserved.ARM DDI 0344I
Non-Confidential