4.1.1. System identification control and configuration

The system identification control and configuration registers provide overall management of:

The system identification control and configuration registers also provide the processor ID and information on configured options.

The system identification control and configuration registers consist of 18 read-only registers and seven read/write registers. Figure 4.1 shows the arrangement of registers in this functional group.

Figure 4.1. System control and configuration registers

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


Some of the functionality depends on how you set external signals at reset.

Copyright © 2006-2011 ARM Limited. All rights reserved.ARM DDI 0363G
Non-ConfidentialID041111