3.3.3. Raw Event Status Register

The EventRawStatus Register is read-only. On a read, it returns the status from your user defined event from the peripheral interface logic, or the unmasked events status from the corresponding read or write buffer. Figure 3.3 shows the register bit assignments.

Figure 3.3. EventRawStatus Register bit assignments

Table 3.4 lists the register bit assignments.

Table 3.4. EventRawStatus Register bit assignments

BitName Function
[31:8]-User defined.
[7:3]-Reserved, read undefined.
[2]WrBufEventRawORed events from write buffer status flags.
[1]RdBufEventRawORed events from read buffer status flags.
[0]-Reserved, read undefined.
Copyright © 2005 ARM Limited. All rights reserved.ARM DDI 0364A
Non-Confidential