4.2.29. c15 summary table

Table 4.27 shows the system control registers when CRn is c15.

Table 4.27. c15 system control registers

0c00Power Control RegisterRW[a][b]Power Control Register
c10NEON busy RegisterRO0x00000000NEON busy Register
4c00Configuration Base AddressRO[c][d]Configuration Base Address Register
5c42Select Lockdown TLB Entry for read WO[e]-c15, TLB lockdown operationsc15, TLB lockdown operations
4Select Lockdown TLB Entry for writeWOe-
c52Main TLB VA registerRWe-
c62Main TLB PA registerRWe-
c72Main TLB Attribute registerRW-

[a] RW in Secure state. Read only in Non-secure state.

[b] Reset value depends on the MAXCLKLATENCY[2:0] value. SeeConfiguration signals.

[c] RW in Secure privileged mode and RO in Non-secure state and user secure state.

[d] In Cortex-A9 uniprocessor implementations the configuration base address is set to zero.

     In Cortex-A9 MPCore implementations the configuration base address is reset to PERIPHBASE[31:13] so that software can determine the location of the Snoop Control Unit registers.

[e] No access in Non-secure state.

Copyright © 2008-2009 ARM. All rights reserved.ARM DDI 0388E