8.3.2. Preload Engine pause channel operation

The PLEPC operation characteristics are:

Purpose

Pauses PLE activity.

You can perform a PLEPC operation even if no PLE channel is currently active. In this case, even if a new PLE channel is programmed afterwards, its execution does not start until after a PLE Resume Channel operation.

To perform the PLE PC operation, use:

MCR p15, 0, <Rt>, c11, c3, 0

<Rt> is not taken into account in this operation.

Copyright © 2008-2009 ARM. All rights reserved.ARM DDI 0388E
Non-Confidential