4.1.2. DMC Integration Inputs Register at 0x0E04

The read-only dmc_int_inputs Register enables an external master to access the inputs of the DMC using the APB interface. This register is only for test. It can only be read in Config state.

Figure 4.4 shows the register bit assignments.

Figure 4.4. dmc_int_inputs Register bit assignments

Table 4.4 lists the register bit assignments.

Table 4.4. dmc_int_inputs Register bit assignments

BitsNameFunction
[31:24]-Read undefined
[23:8]dmc_qos_overrideReturns the value of the dmc_qos_override external input
[7]dmc_dqm_initReturns the value of the dmc_dqm_init external input
[6]dmc_cke_initReturns the value of the dmc_cke_init external input
[5]dmc_msyncReturns the value of the dmc_msync external input
[4]dmc_asyncReturns the value of the dmc_async external input
[3]dmc_use_ebiReturns the value of the dmc_use_ebi external input
[2]dmc_ebibackoffReturns the value of the dmc_ebibackoff external input
[1]dmc_ebigrantReturns the value of the dmc_ebigrant external input
[0]dmc_csysreqReturns the value of the dmc_csysreq external input
Copyright © 2006 ARM Limited. All rights reserved.ARM DDI 0392B
Non-Confidential