3.3.23. DMC user_config Register at 0x0304

The dmc_user_config Register is a general purpose write-only register. This register sets the value of the dmc_user_config[7:0] primary outputs. The dmc_user_config Register can be written in all states. Figure 3.28 shows the register bit assignments.

Figure 3.28. dmc_user_config Register bit assignments

Table 3.24 lists the register bit assignments.

Table 3.24. dmc_user_status Registers bit assignments

[31:8]-Reserved, write as zero
[7:0]dmc_user_configThis value sets the state of the dmc_user_config[7:0] primary output pins
Copyright © 2006 ARM Limited. All rights reserved.ARM DDI 0392B