2.1.4. Tie-off signals

The tie-off signals initialize various operating parameters of the DDR2 DMC when it exits the reset state. Figure 2.5 shows the tie-off signals.

Figure 2.5. Tie-off signals

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


cke_init and dqm_init are only available if the DDR2 DMC is configured to contain a legacy pad interface.

See Tie-off signals for more information.

Copyright © 2007, 2009-2010 ARM Limited. All rights reserved.ARM DDI 0418E