2.1.2. APB slave interface

The APB slave interfaces provide access to the TZASC registers that enables you to program the system configuration parameters and obtain status information. See Chapter 3 Programmers Model for more information.

Note

The APB slave interface must only be accessible to processors in Secure state, otherwise it can compromise the security of the system.

You can configure the TZASC to support either the:

See the AMBA 2 APB Protocol v1.0 Specification or AMBA 3 APB Protocol v1.0 Specification for more information.

Note

If you configure the TZASC to support the AMBA 2 APB protocol, it provides all the signals, except pready and pslverr.

Copyright © 2008, 2010 ARM Limited. All rights reserved.ARM DDI 0431B
Non-Confidential