1.7.2. Design flow

The ETM-A5 is delivered as synthesizable RTL. Before it can be used in a product, it must go through the following process:

  1. Implementation. The implementer synthesizes the RTL to produce a hard macrocell.

  2. Integration. The integrator connects the implemented design into a SoC.

  3. Programming. The debug software developer programs the device.

Each stage of the process:

Note

This manual refers to implementation-defined features that are applicable to build configuration options. References to a feature that is included mean that the appropriate build and pin configuration options have been selected, while references to an enabled feature mean one that has also been configured by software.

Copyright © 2009 ARM. All rights reserved.ARM DDI 0435A
Non-Confidential