10.4.15. Integration Miscellaneous Signals Register

The DBGITMISCOUT characteristics are:


Controls signal outputs when bit [0] of the Integration Mode Control Register is set.

Usage constraints

DBGITMISCOUT is not accessible on the extended CP14 interface.


Available in all configurations.


See the register summary in Table 10.1.

Figure 10.18 shows the DBGITMISCOUT bit assignments.

Figure 10.18. DBGITMISCOUT bit assignments

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

Table 10.17 shows the DBGITMISCOUT bit assignments.

Table 10.17. DBGITMISCOUT bit assignments

[31:10] -Reserved, SBZP.

Set value of the DBGRESTARTED output pin. Handshake for DBGRESTART that is the same as the DSCR[1] bit. The reset value is 0.

[8:5] -Reserved, SBZP.
[4]PMUIRQSet value of PMUIRQ output pin. When this bit is set to 1, the corresponding nPMUIRQ signal is cleared to 0. The reset value is 1.
[3:1]-Reserved, SBZP.

Set value of the DBGACK output pin

Copyright © 2011-2013 ARM. All rights reserved.ARM DDI 0464F