3.3.16. QoS Range Register

The QoS Range Register characteristics are:

Purpose

Enables you to program the minimum and maximum values for the ARQOS and AWQOS signals that the latency regulators generate. One register exists for each slave interface.

Usage constraints

Accessible using only secure accesses, unless you set the Secure Access Register. See Table 3.4.

Configurations

Only has an effect when QOSOVERRIDE is HIGH for the associated interface.

Attributes

Table 3.19 shows the bit assignments.

Table 3.19. QoS Range Register

BitsReset valueAccessFunction
[31:28]-RAZ/WIReserved
[27:24]0x0R/WMaximum ARQOS value
[23:20]-RAZ/WIReserved
[19:16]0x0R/WMinimum ARQOS value
[15:12]-RAZ/WIReserved
[11:8]0x0R/WMaximum AWQOS value
[7:4]-RAZ/WIReserved
[3:0]0x0R/WMinimum AWQOS value

Copyright © 2011-2012 ARM. All rights reserved.ARM DDI 0470D
Non-ConfidentialID040512