A.2. Signal direction

The signals described in the remaining sections can be implemented as inputs or outputs. Figure A.1 provides an example of the awid_<port_name> signal, and the awid_<port_name>_s or awid_<port_ name>_m signal described in Table A.3. The term <port_name> is a component part of the signal that is added by the system.

In a full NIC-400 system, the signal naming convention takes the name of the signal and the component part only. If there is only a bridge connected to a single component, then the s and m extensions are added to the signal.

Figure A.1. Signal direction

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

For this reason the signal tables mostly reflect:

Copyright © 2012-2014 ARM. All rights reserved.ARM DDI 0475E