A.1. Global signals

Table A.1 shows the global NIC-400 signals. These signals are used by all the protocols. For more information on each signal, see the ARM® AMBA® AXI and ACE Protocol Specification.

Table A.1. Global signals

NIC-400 signal adaptation[a]SourceDescription
<Domain name>clkClock sourceGlobal clock signal
<Domain name>resetnReset sourceGlobal reset signal
<Domain name>clkenEnable sourceGlobal enable signal
<Domain name>clk_rClock sourceGPV clock signal
<Domain name>reset_rReset sourceGPV reset signal

[a] <Domain name> is a name that you create when using AMBA Designer.


Copyright © 2012-2014 ARM. All rights reserved.ARM DDI 0475E
Non-ConfidentialID110314