3.13.13. TPIU EXCTL Out Port register

The EXTCTL_Out_Port register characteristics are:


Two ports can be used as a control and feedback mechanism for any serializers, pin sharing multiplexers, or other solutions that might be added to the trace output pins either for pin control or a high speed trace port solution. These ports are raw register banks that sample or export the corresponding external pins. The output register bank is set to all 0s on reset. The input registers sample the incoming signals and are therefore undefined.

Usage constraints

There are no usage constraints.


This register is available in all configurations.


See the register summary in Table 3.114.

Figure 3.119 shows the bit assignments.

Figure 3.119. EXTCTL_Out_Port register bit assignments

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

Table 3.127 shows the bit assignments.

Table 3.127. EXTCTL_Out_Port register bit assignments




EXTCTL outputs.

Copyright © 2011-2013 ARM. All rights reserved.ARM DDI 0480F