3.15.17. CTI Channel to Trigger 3 Enable register

The CTIOUTEN3 register characteristics are:


Defines which channels can generate a ctitrigout[3] output. There is a bit for each of the four channels implemented. This register affects the mapping from application trigger to trigger outputs.

Usage constraints

There are no usage constraints.


This register is available in all configurations.


See the register summary in Table 3.151.

Figure 3.159 shows the bit assignments.

Figure 3.159. CTIOUTEN3 register bit assignments

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

Table 3.168 shows the bit assignments.

Table 3.168. CTIOUTEN3 register bit assignments




Enables a cross trigger event to ctitrigout when the corresponding channel is activated. There is one bit of the field for each of the four channels. On writes, for each bit:


The corresponding channel is ignored by the output trigger 3.


When an event occurs on the channel corresponding to this bit, generate an event on output event 3, ctitrigout[3].

Copyright © 2011-2013, 2015 ARM. All rights reserved.ARM DDI 0480G