3.11.4. ETB RAM Read Pointer register

The RRP register characteristics are:

Purpose

The RAM Read Pointer register sets the read pointer to the required value. Writing to this register initiates a RAM access. The RAM Read Data Register is then updated.

You can also read this register to determine which memory location is currently referenced.

You must not write to this register when trace capture is enabled, that is, when FFSR.FtStopped is 0 and CTL.TraceCaptEn is 1. When trace capture is enabled, it is not possible to update the register even if there is a write operation.

Usage constraints

There are no usage constraints.

Configurations

This register is available in all configurations.

Attributes

See the register summary in Table 3.79.

Figure 3.76 shows the bit assignments.

Figure 3.76. RRP register bit assignments

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


Table 3.83 shows the bit assignments.

Table 3.83. RRP register bit assignments

BitsNameFunction
[31:10]Reserved

-

[9:0]RAM_Read_Pointer

Sets the read pointer to the required value. The read pointer reads entries from the Trace RAM through the APB interface.


Copyright © 2011-2013, 2015 ARM. All rights reserved.ARM DDI 0480G
Non-ConfidentialID042315