10.8.3. External Debug Integration Output Control Register

The EDITOCTRL characteristics are:

Purpose

Controls signal outputs when EDITCTRL.IME is set. See External Debug Integration Mode Control Register.

Usage constraints

Accessible through the internal memory-mapped interface and the external debug interface. The access conditions are:

OffDLKOSLKEDADSLKDefault
ErrorErrorError-WIWO

Table 10.1 describes the access conditions.

Configurations

EDITOCTRL is in the Core power domain.

Attributes

See the register summary in Table 10.10.

Figure 10.9 shows the EDITOCTRL bit assignments.

Figure 10.9. EDITOCTRL bit assignments

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


Table 10.13 shows the EDITOCTRL bit assignments.

Table 10.13. EDITOCTRL bit assignments

BitsNameFunction
[31:3]-

Reserved, res0.

[2]nPMUIRQ

Controls the nPMUIRQ output. When this bit is set to 1, the corresponding nPMUIRQ signal goes LOW. The reset value is 0.

[1]CTI PMUIRQ

Controls the internal signal equivalent to PMUIRQ that goes from the PMU to the CTI. The reset value is 0.

[0]CTI DBGTRIGGER

Controls the internal signal equivalent to DBGTRIGGER that goes from the Debug unit to the CTI. The reset value is 0.


Copyright © 2013, 2014 ARM. All rights reserved.ARM DDI 0488D
Non-ConfidentialID012914