11.2. DWT functional description

A full DWT contains four comparators that you can configure as:

The first comparator, DWT_COMP0, can also compare against the clock cycle counter, CYCCNT. You can also use the second comparator, DWT_COMP1, as a data comparator.

A reduced DWT contains two comparators that you can use as a watchpoint or as a trigger. The comparators support data matching.

The DWT if present contains counters for:

Note

An event is generated each time a counter overflows.

You can configure the DWT to generate PC samples at defined intervals, and to generate interrupt event information.

The DWT provides periodic requests for protocol synchronization to the ITM.

Copyright © 2014-2016, 2018 Arm. All rights reserved.ARM DDI 0489F
Non-ConfidentialID121118