A.9. Memory remap signals

The remapping of the boot memory range is controlled by the MTXREMAP signals.

Table A.28. Memory remap signals

NameDirectionWidthDescription
MTXREMAPInput3

REMAP[0]: The Embedded flash memory region represents the maximum supported eFlash size.

REMAP[1]: If SRAM1 is not present the corresponding memory range can be mapped to the AHB expansion port.

REMAP[2]: If SRAM2 is not present the corresponding memory range can be mapped to AHB expansion port.

EMAP[3]: If SRAM3 is not present the corresponding memory range can be mapped to AHB expansion port.


Copyright © 2015. All rights reserved.ARM DDI 0551A
Non-ConfidentialID120415