1.3.8. AHB Master Interface

The 128-bit AHB master interface of the CG092 is an AHB-Lite interface with the following limitations and extensions:


There is no power or speed gain in burst operations, so AHB bursts on are not supported on the AHB master interface:

  • From the time the CG092 is enabled, the direct connection between the AHB Slave and Master interface is closed. The CG092 drives HTRANSM to IDLE and makes only NONSEQ transaction if a bypass, linefill or prefetch transaction must be executed.

    HSELM is continuously driven with 0b1 and transactions received with HSELS 0b0 on the AHB slave interface are not propagated to the AHB master interface. (HTRANSM remains in IDLE).

  • The CG092 is transparent if disabled. If therefore a master/interconnect driving the AHB slave interface cancels/terminates a burst, this will appear on the AHB master interface. The CG092 might change control signals on the AHB master interface during a waited transfer (terminating and starting a new address phase)

Copyright © 2016. All rights reserved.ARM DDI 0569A