14.4.1. Compute subsystems and mobile applications

The following figure shows an example mobile applications processor with Cortex-A57 and Cortex-A53 series processors, CoreLink MMU-500 System MMU, and a range of CoreLink 400 system IP.

Figure 14.8. Example mobile applications processor with CoreLink IP

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

In this system, the ARM Cortex-A57 and Cortex-A53 processors provide a big.LITTLE cluster combination and are connected to the CCI-400 with AMBA 4 ACE to provide full hardware coherency. The ARM Mali®-T628 GPU and IO coherent masters connect to the CCI-400 through AMBA 4 ACE-Lite interfaces.

ARM provides different interconnect options for maintaining cross cluster coherency:

CoreLink CCI-400 Cache Coherent Interconnect

This supports two multi-core clusters and uses the AMBA 4 and AMBA Coherency Extensions or ACE. ACE uses a MOESI state machine for cross-cluster coherency.

CoreLink CCN-504 Cache Coherent Network

This supports up to four multi-core clusters and includes integrated L3 caches and two channel 72-bit DDR.

The ARM CoreLink CCN-504 Cache Coherent Network provides optimum system bandwidth and latency. The CCN family of interconnects are designed for cores to attach using AMBA 5 CHI, though there is some AMBA 4 ACE support. The CCN-504 in particular, provides AMBA 4 AXI Coherency Extensions (ACE) compliant ports for full coherency between multiple Cortex-A series processors, better utilization of caches and simplification of software development. This feature is essential for high bandwidth applications including gaming servers and networking that require clusters of coherent single and multi-core processors. Combined with the ARM CoreLink network interconnect and memory controller IP, the CCN increases system performance and power efficiency.

CoreLink CCN-508 Cache Coherent Network

This supports up to eight multi-core clusters, 32 cores and includes integrated L3 caches and four channel 72-bit DDR

CoreLink MMU-500 System MMU

This provides address translation for system components, see Chapter 12 The Memory Management Unit.

CoreLink TZC-400 TrustZone Address Space Controller

This performs security checks on transactions to memory or peripherals and permits regions of memory to be marked as secure.

CoreLink DMC-400 Dynamic Memory Controller

This provides dynamic memory scheduling and interfacing to external DDR2/3 or LPDDR2 memory.

CoreLink NIC-400 Network Interconnect

This is a highly configurable and enables you to create a complete high performance, optimized, and AMBA-compliant network infrastructure.

The possible configurations for the CoreLink NIC-400 Network Interconnect can range from a single bridge component, for example an AHB to AXI protocol conversion bridge, to a complex interconnect that consists of up to 128 masters and 64 slaves of AMBA protocols.

Copyright © 2015 ARM. All rights reserved.ARM DEN0024A