15.1. Idle management

When a core is idle, the Operating System Power Management (OSPM) transitions it into a low-power state. Typically, a choice of states is available, with different entry and exit latencies, and different levels of power consumption, associated with each state. The state that is used typically depends on how quickly the core is required again. The power states that can be used at any one time might also depend on the activity of other components in an SoC, beside the cores. Each state is defined by the set of components that are clock-gated or power-gated when the state is entered.

The time required to move from a low-power state to a running state, known as the wakeup latency, is longer in deeper states. Although idle power management is driven by thread behavior on a core, the OSPM can place the platform into states that affect many other components beyond the core itself. If the last core in a cluster becomes idle, the OSPM can target power states that affect the whole cluster. Equally, if the last core in an SoC becomes idle, the OSPM can target power states that affect the whole SoC. The choice is also driven by the use of other components in the system. A typical example is placing memory in self-refresh when all cores, and any other bus masters, are idle.

The OSPM has to provide the necessary power management software infrastructure to determine the correct choice of state. In idle management, when a core or cluster has been placed into a low-power state, it can be reactivated at any time by a core wakeup event. That is, an event that can wake up a core from a low-power state, such as an interrupt. No explicit command is required by the OSPM to bring the core or cluster back into operation. The OSPM considers the affected core or cores to be available at all times even if they are currently in a low-power state.

Copyright © 2015 ARM. All rights reserved.ARM DEN0024A
Non-ConfidentialID050815