Chapter 7. AArch64 Floating-point and NEON

The ARM Advanced SIMD architecture, its associated implementations, and supporting software, are commonly referred to as NEON technology. There are NEON instruction sets for both AArch32 (equivalent to the ARMv7 NEON instructions) and for AArch64. Both can be used to significantly accelerate repetitive operations on large data sets. This can be useful in applications such as media codecs.

The NEON architecture for AArch64 uses 32 × 128-bit register, twice as many as for ARMv7. These are the same registers used by the floating-point instructions. All compiled code and subroutines conforms to the EABI, which specifies which registers can be corrupted and which registers must be preserved within a particular subroutine. The compiler is free to use any NEON/VFP registers for floating-point values or NEON data at any point in the code.

Both floating-point and NEON are required in all standard ARMv8 implementations. However, implementations targeting specialized markets may support the following combinations:

Copyright © 2015 ARM. All rights reserved.ARM DEN0024A