1.5 Monitor compatibility

There are hardware limitations affecting HDMI support and issues might be encountered when using the V2M-Juno motherboard with certain monitors.

The following table summarizes the results for monitors that ARM® has tested.

Table 1-1 Monitor compatibility with the V2M-Juno motherboard

Manufacturer Model Native resolution Native resolution achieved Fallback to 1024x768 @ 60Hz achieved No display achieved
Success rate Blanking occurs Success rate Blanking occurs
BenQ GL2460 1920×1080@60Hz 91% Yesa 0% n/a 9%
BenQ GL2450 1920×1080@60Hz 100% Yesa n/a n/a n/a
BenQ G2200WT 1680×1050@60Hz 100% No n/a n/a n/a
BenQ BL2201 1680×1050@60Hz 100% No n/a n/a n/a
Dell P1911 1440×900@60Hz 100% No n/a n/a n/a
HP L1940T 1280×1024@60Hz 100% No n/a n/a n/a
Iiyama ProLite E511S 1600×1200@60Hz 100% No n/a n/a n/a
LG LED 22M35 1920×1080@60Hz 100% Yesa n/a n/a n/a
NEC EA274WMi 2560×1440@52.1Hz 100% Yesa n/a n/a n/a
NEC LCD2070NX 1600×1200@60Hz 20% No n/a n/a n/a
Samsung SyncMaster S22B370 1920×1080@60Hz 0% n/a 0% n/a
Samsung SyncMaster SA850 2560×1440@60Hz 0% n/a 100%b No n/a
No blanking occurs when invoking the kernel with a video command-line option that includes an R flag. For example:
The Samsung SyncMaster SA850 is available for purchase at the time of writing and works well when using 1024×768 or half of the native resolution, but only if the following kernel command-line option is provided to force the resolution. ARM recommends adding this option to get the monitor to work:
(If you have a 3.10 based kernel, then replace HDMI-A-1 with DVI-D-1)
Non-ConfidentialPDF file icon PDF versionARM DEN0928F
Copyright © 2015 ARM. All rights reserved.