2.2 SD card filesystem layout

If you are using the recovery images or following the Linaro software release instructions, you do not need to change any of the firmware or configuration files.

The V2M-Juno motherboard firmware images, SoC software images, and settings are stored on an SD card on the board. At boot time, the V2M-Juno motherboard firmware accesses the SD card and copies certain images into internal flash memory.
The SD card is exposed to a host computer as a USB mass storage device with a FAT16 filesystem. A brief description of the filesystem layout follows.
Figure 2-1 filesystem layout
To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

Related concepts
1.2 Ports and I/O
Non-ConfidentialPDF file icon PDF versionARM DEN0928F
Copyright © 2015 ARM. All rights reserved.