A.2. AXI Slave Interface Block (ASIB) signals

You can configure the ASIB to have the QoS signals that Table A.1 shows.

Table A.1. ASIB signals

NameDirectionWidthDescription
AWQOS[a]Input[3:0]The QoS value for this write transaction. This acts as a priority and the higher the value, the higher the priority.
ARQOS[a]Input[3:0]The QoS value for this read transaction. This acts as a priority and the higher the value, the higher the priority.

[a] This signal is an optional signal in the NIC-400 base product. This signal is overridden if you use QoS-400, and you use latency regulation.


Copyright © 2012, 2013 ARM. All rights reserved.ARM DSU 0026B
Non-ConfidentialID051113