2.1.1. Slave interfaces

Within NIC-400, you can only configure TLX as a bridge, that is, TLX can only support a single slave interface. However, it is possible for one or more TLX bridges to be configured within a larger NIC, as shown in Figure 2.1.

The TLX supports all the slave interfaces that the base NIC-400 product supports. These are:

You can only configure an AHB slave interface if the master interface is not of type AHB, that is, neither an AHB to AHB bridge nor an AHB to AHB TLX bridge is supported.

You can configure a slave interface to support QVN if:

See the ARM® CoreLink™ QVN-400 Network Interconnect Advanced Quality of Service for Virtual Networks Supplement to ARM® CoreLink™ NIC-400 Network Interconnect Technical Reference Manual.

Copyright © 2012, 2013 ARM. All rights reserved.ARM DSU 0028C
Non-ConfidentialID121113