3.5.4. Remote debug information

The RDI Log window displays the low level communication messages between the debugger and the target processor.

This facility is not normally enabled. It must be specially turned on when the RDI is compiled.

To display remote debug information (RDI) select RDI Protocol Log from the View menu. The RDI Log window is displayed.

Use the RDI Log Level dialog, obtained by selecting Set RDI Log Level from the Options menu, to select the information to be shown in the RDI Log window:

Bit 0

RDI level logging on/off

Bit 1

Device driver logging on/off


The RDI log level is used internally within ARM to assist with debugging. This level should be changed only if you have been requested to do so by ARM.

Copyright © 1997, 1998 ARM Limited. All rights reserved.ARM DUI 0040D