3.5.12. Flash download

Use the Flash Download dialog (Figure 3.13) to write an image to the Flash memory chip on an ARM Development Board or any suitably equipped hardware.

Figure 3.13. Flash Download dialog

Flash Download dialog
Set Ethernet Address

Use the Set Ethernet Address option if necessary after writing an image to Flash memory. You might do this, for example, if you are using Angel with ethernet support.

When you click OK, you are prompted for the IP address and netmask, for example, 193.145.156.78.

You do not need to use this option if you have built your own Angel port with a fixed ethernet address.

Arguments / Image

Specifies the arguments or image to write to Flash.

Use the Browse button to select the image.

For more information about writing to Flash memory, including details of how to build your own Flash image, refer to the Target Development System User Guide.

Copyright © 1997, 1998 ARM Limited. All rights reserved.ARM DUI 0040D
Non-Confidential