3.7.4. EmbeddedICE configuration

Use the EmbeddedICE Configuration dialog to select the settings for an EmbeddedICE target. This option is enabled only if you have EmbeddedICE connected to your machine.

Follow these steps to change the EmbeddedICE configuration options:

  1. Select Configure EmbeddedICE from the Options menu. The configuration dialog is displayed (Figure 3.20).

    Figure 3.20. Configuration of EmbeddedICE target

    Configuration of EmbeddedICE target
  2. Change the following configuration settings, as required:

    Name

    Name given to the EmbeddedICE configuration. Valid options are:

    ARM7DI

    for use with an ARM7 core with debug extensions and EmbeddedICE macrocell (includes ARM7DMI)

    ARM7TDI

    for use with an ARM7 core with Thumb and debug extensions and EmbeddedICE macrocell (includes ARM7TDMI).

    Version

    Version given to the EmbeddedICE configuration. Specify the specific version to use or enter any if you do not require a specific implementation.

    Load Agent

    Specify a new EmbeddedICE ROM image file, download it to your board, and run it. Use this for major updates to the ROM.

    Load Config

    Specify an EmbeddedICE configuration file to be loaded. Click OK to run. Use this for minor updates.

Copyright © 1997, 1998 ARM Limited. All rights reserved.ARM DUI 0040D
Non-Confidential