2.9.2. Editing a build step pattern

Note

A build step pattern can use one or more tools, process one or more input files, and can produce one or more outputs.

Follow these steps to edit a build step pattern:

  1. Select the Build Step Pattern from the Project Template Editor dialog.

  2. Click Edit. The Build Step Pattern dialog is displayed (Figure 2.24).

    Figure 2.24. Edit Build Step Pattern dialog

    Edit Build Step Pattern dialog
  3. Edit the build step pattern as required, possibly deleting, editing, or adding input/output patterns, as follows:

    Deleting an input/output pattern

    1. Select the pattern line from the list in the Input or Output Partition box. The selected pattern is loaded on the edit line.

    2. Click Delete to remove the pattern.

    Editing an input/output pattern

    1. Select the pattern line from the list in the Input or Output Partition box. The selected pattern is loaded on the edit line.

    2. Edit the pattern as required (see Specifying input and output patterns in a build step pattern).

    3. Click Replace to change the pattern.

    Adding a new input/output pattern

    1. Enter an Input or Output Partition.

    2. Enter the pattern for the partition.

    3. Click Add.

  4. Change the Command Line as required.

  5. Click OK to save the changes and exit the dialog.

  6. Click Close to close the Project Template Editor dialog.

Note

If you do not click Add, Replace or Delete in step 3, you are prompted to save or cancel your changes before exiting this dialog.

You can have more than one Edit Build Step Pattern dialog open at one time, so that you can copy from one build step pattern to another easily using Ctrl+Insert (to copy text) and Shift+Insert (to paste text).

Copyright © 1997, 1998 ARM Limited. All rights reserved.ARM DUI 0040D
Non-Confidential