4.3.4. Board configuration tab

The Board configuration tab has a list of target boards. When you select a board, the debugger then shows the memory mapped registers for the peripherals and microcontrollers on that board.

Figure 4.14. Board tab

Board tab

Note

This tab only appears if you are using a recent toolset that supports this functionality (such as ADS 1.2 or later), but you are not using RealMonitor.

If you are using RealMonitor, you can instead set the board that you are using with RealMonitor.

Copyright © 1998-2002 ARM Limited. All rights reserved.ARM DUI 0048F
Non-Confidential