2.1.2. Host hardware requirements

This section defines the minimum recommended hardware requirements for installing and running the Multi-ICE DLL and, on Windows, the Multi-ICE server.

Disk space

If you carry out a full installation of the software, up to 20MB of hard disk space is required.

To use the Multi-ICE software on Windows

To use the Multi-ICE server and DLL on Windows, you require the following:

  • 200MHz Pentium processor

  • system memory:

    • 32MB RAM for Windows 95, Windows 98, and Windows Me

    • 64MB RAM for Windows NT 4.0 and Windows 2000.

  • CD-ROM drive (this can be a networked CD-ROM drive)

  • an OS supported graphics device capable of VGA resolution or better

  • parallel port

  • network card (if remote access to the server is required).

To use the Multi-ICE DLL on Solaris

To use the Multi-ICE DLL on Solaris, you require the following:

  • Sun UltraSparc or compatible machine

  • Solaris 2.6, 7.0, or 8.0, with the Common Desktop Environment (CDE)

  • CD-ROM drive (this can be a networked CD-ROM drive)

  • connected network interface.

To use the Multi-ICE DLL on HP-UX

To use the Multi-ICE DLL on HP-UX, you require the following:

  • HP PA-RISC v1.1 or v2.0 processor

  • HP-UX 10.20 or 11

  • CD-ROM drive (this can be a networked CD-ROM drive)

  • connected network interface.

To use the Multi-ICE DLL on Linux

To use the Multi-ICE DLL on Linux, you require the following:

  • 200MHz Pentium processor

  • Redhat Linux 6.2 or 7.1

  • CD-ROM drive (this can be a networked CD-ROM drive)

  • connected network interface.

Copyright © 1998-2002 ARM Limited. All rights reserved.ARM DUI 0048F
Non-Confidential