3.1.4. Run control menu

The Run Control menu controls the synchronized stopping and starting of multiple cores and is shown in Figure 3.4.

Figure 3.4. The Run Control menu

The Run Control menu

The menu contains the following items:

Independent

Makes all configured devices behave independently. There is no interaction between devices.

All Run

Starts all devices as close to simultaneously as the hardware allows.

All Run/Stop

Makes all configured devices:

  • run when all connected debuggers have indicated that their processor can start

  • stop if any one of the devices stop.

Custom

Makes configured devices interact as you have specified using the Set-up Custom action.

Set-up Custom...

Displays a dialog box that enables you to specify the way in which devices interact. See Setting up interaction between devices and Setting up the poll frequency for more information.

Load Settings...

Displays a dialog box that enables you to load run control settings previously saved using Save Settings.

Save Settings...

Displays a dialog box that enables you to save the run control settings to a file.

The items on this menu are described in detail in the section Using the Multi-ICE server with multiple processors.

Copyright © 1998-2002 ARM Limited. All rights reserved.ARM DUI 0048F
Non-Confidential