3.4.2. Editing default.ami and peripherals.ami

This description assumes that your model was based on Timer:

  1. Load the default.ami file into a text editor, and find the following lines:


    {Timer=Default_Timer
    }

  2. Add the reference to your model:


    {Timer=Default_Timer
    }
    {MyModel=Default_MyModel
    }

  3. Save your edited default.ami file.

  4. Load the peripherals.ami file into a text editor, and find the Timer section:

    { Default_Timer=Timer
    .
    .
    .
    }
    
  5. Using this as an example, add a configuration section for your model. Depending on how much your model differs from Timer, it may be easiest to edit a copy of the Timer section.

  6. Save your edited peripherals.ami file.

Copyright © 1999-2001 ARM Limited. All rights reserved.ARM DUI0058D
Non-Confidential